jump to navigation

Optimizing Your Manufacturing Process Using Lean Manufacturing October 14, 2008

Posted by candasys in Production Control Software, Supply Chain, business advice, business help.
Tags: , , ,
add a comment

What is Lean Manufacturing? Lean Manufacturing is the principle of increasing revenue not just by increasing sales but by reducing waste.

“Lean manufacturing or lean production, which is often known simply as “Lean”, is the practice of a theory of production that considers the expenditure of resources for any means other than the creation of value for the presumed customer to be wasteful, and thus a target for elimination. In a more basic term, more work with fewer people. Lean manufacturing is a generic process management philosophy derived mostly from the Toyota Production System.”
Source: Wikipedia

The Lean Manufacturing philosophy names seven major wastes that should be dealt with

  • Over-production,
  • Transportation,
  • Waiting time,
  • Processing,
  • Motion,
  • Inventory,
  • Scrap.

The idea here is that when you are able to control the waste you will be able to control earnings and expenditure.

Lean, as in free from superficial baggage, aims to help manufacturers become more cost efficient and less wasteful. The principle follows a domino effect. If waste is reduced, the quality of the product is increased. If the quality of the product is increased, the production time and the production cost decreases. This whole scenario ends up with an increase in total revenue from sales.

If the process is able to minimize or eliminate any of the following listed below, then the production will be said to be “lean”. Also, with Lean Manufacturing follows greater income, greater quality, and less waste an interesting for any company whether they are already pulling down a good amount of revenue or if they are flagging in their sales.

Defects, Overproduction, Transportation, Waiting, Inventory, Motion, Processing

Process planning should adapt to current situations and should be critical of itself. Only then can there be any meaningful and productive change in the processing system.

Six Sigma Certification – Benefits for your Business and Supply Chain June 24, 2008

Posted by candasys in Supply Chain, business advice.
Tags: , , ,
add a comment

Six Sigma Certification – Benefits for your Business and Supply Chain

By: Tony Jacowski

No matter what, your business and supply chain will benefit from Six Sigma certification.

Six Sigma Certification – Will It Really Benefit Your Organization?

The success of Six Sigma certification and implementation depends on many factors. It requires nothing less than a relentless effort and dedication to see that it succeeds. Although specific procedures may be in place, an equal responsibility lies on upper management to dedicate 100% of their time and resources to this mammoth task. The top and bottom ends of your business, and all those in between, need to come together with single minded contributions to make Six Sigma certification and implementation successful.

Benefits To Your Business and your Supply Chain

Six Sigma certification benefits are both tangible and intangible. Intangible benefits can be in the form of customer loyalty that will follow the life of your business. Below we examine some of the benefits of Six Sigma certification.

1. Increase In Your Bottom Line: Six Sigma certification results in improved processes, better utilization of resources like finances, time and materials and reduction in the cost of production. On the customer side, there is higher satisfaction with products/services. This improves your bottom line substantially.

2. Six Sigma Certification Increases Shareholder Value: Fundamentally, this results from increased revenues, but in addition to this, there is increased customer loyalty and confidence that raises the stock values as well as the value to shareholders (to whom you are responsible).

3. Total Customer Satisfaction: Customers get more than what they asked for on the product/service side, at a lower price or higher value.

4. Decreased Employee Attrition: Six Sigma training boosts employee morale due to a reduced workload. Six Sigma certified employees realize the positive returns of quality work, which keeps them motivated. This reduces employee turnover and burnout.

5. Six Sigma Certification Creates A Win-Win Situation For The Supply Chain: In converting supplier-customer relationships to long-term partnerships, both parties win. Six Sigma training and certification accelerates this process with its focus on quality; prices come down and both the product quality and life cycle time improve.

IT Support Contracts and how they help you March 3, 2008

Posted by candasys in business advice, business help, it consultants.
Tags: , , , , ,
add a comment

IT Support Contracts and how they help you

IT support contracts should be complete and transparent, and should not confuse you with obscure wording. If there is some unavoidable legalese that you don’t understand, discuss it with your IT support contractor and get clarifications in writing and agree the level of service you require so that the contractor can supply an appropriate service level agreement (SLA ).

IT support covers a wide range of requirements and you might not need all the services offered. You should preferably select a contractor who allows you to tailor the kind of support to your specific needs.

One point you should get clarified in particular is the kinds of response you can expect to support requests. Support companies and your expectations can vary widely in this matter.

With the above general outline, let us delve into the major specifics of IT support contracts.

Typical Terms of an IT Support Contract

The contract should be clear about the items supported.

  • EQUIPMENT: An IT setup will typically have servers, PCs, Laptops, Printers and so on. Which specific items will receive support?
  • AGE LIMITATIONS: Are there any clauses that put a limit on the age of the equipment that will be supported?
  • SOFTWARE: You will be using many kinds of software such as server software, desktop OS, functional software like Payroll, system protection software like Anti-Virus, etc. Installing and configuring some of these pieces of software can be a daunting task. The software can crash during operations. Identify which software will be supported? What kind of support will be provided, e.g., will there be any support for installation and configuration or upgrades?
  • HOME USERS: Under flexible working arrangements, many users might be working with company equipment from their homes. Will they be supported?

The next important issue is how the support will be provided.

  • HOW: Typically, support is provided over the telephone first, assessing the the extent of the problem, where possible guiding the user to rectify the problem by themselves. If this proves unsatisfactory, remote support by accessing the clients system from the support company’s system may be attempted. To enable such remote support, the support company might install a VPN connection or remote desktop support client. If this also proves insufficient, a site visit may be needed. Understand exactly how a support request will be handled, and how the service level will be escalated to a higher level.
  • WHEN: Response times can differ with different kinds of problems. Server problems will need to be attended without delay. How much delay is provided in the contract? Desktop problems can afford some delay. Don’t insist on expensively short response times for these.

IT support contracts will typically also contain certain obligations on your part. Some major obligations are listed below. Check that you have made arrangements to meet all such obligations.

  • Designating a specified person as the person responsible for the preliminary fault identification and troubleshooting. This person will be the main contact person with the IT support company.
  • Try not to make system changes without prior consent of the support company
  • Doing regular housekeeping activities like backups, testing the backups, and so on (check who is responsible for these tasks and who is responsible for data recovery should the need arise).
  • Paying bills as agreed in the contracts

There will also be certain exclusions from the scope of support. Pre-existing faults and support for functional software such as accounting are examples of typical exclusions.

Finally, there will typically be a clause on how to resolve disputes.

Network Support : How should it be done? March 3, 2008

Posted by candasys in business advice, business help, it consultants, network help, network support.
Tags: , , , ,
add a comment

Network Support : How should it be done?

Big companies often have a large network that they need to manage and maintain. This type of system management requires staff that has a computer technical education as well as network training. Without this type of extensive system management large companies would be unable to function as a working whole. Network training gives someone the skills and training that they need to manage and control a large network, as well as make decisions regarding the network that can affect the entire company.

Many of the details pertaining to network management have to do with the security issues surrounding the computer network of a company. There are many issues that have to do with the security of a company that uses computers as one of their main forms of communication with the outside world. This communication via the Internet means that individual computers, as well as the entire network, are at risk when ports to the outside computer world are opened. Network training gives people the skills that they need to maintain a secure system and keep track of the computer network. With secure network management the communication network of a company can be managed and maintained.

The number of network management positions within a company will be determined by the size of the company. The larger the network of computers the more system administration will be needed to keep track of all the system tools and computers. Studies show that companies without any type of network management in place will soon be plagued with issues of down time as their computer system fails to run efficiently. Studies also show that hiring a computer technician, network consultant or IT Consultant without proper network training can lead to an inefficient system as well. As more companies rely on their computer system for communication with their clients and customers, the importance of adequate and superior network management will increase.

Choosing the right network support is crucial to the success and growth of any business therefore make sure you pick the right team and in many cases outsource the network support to specialized teams or companies who will dedicate their time and effort on keeping your network up and running.

The benefits of IT Consultants March 3, 2008

Posted by candasys in business advice, business help, it consultants.
Tags: , , , , , ,
add a comment

IT Consultant

The benefits of IT Consultants

IT consultants are expert professionals who hold the in-depth knowledge and concept of internet marketing to the fullest to serve the virtual needs of any business. These consultants understand the emerging demands and requirements of the market and business.

In other words, it is not wrong to say that consultants are the driving force behind increasing your market value. Along with clearer concepts and skills, these people are acquainted with adopting newer technologies and tricks. These experts add their valuable contribution by understanding the needs and studying the prospective solution for meeting the arise demands. As a result, IT consultancy has considered as an essential role to play in the working of the IT businesses.

Benefits of IT Consultants

As we have already stated consultants can drive your business into the real path of growth, success and profit. There are some major benefits of choosing their services; including saving time and money, requirements analysis and much more

Contacting consultants will help a company to save its valuable time and resources in valueless marketing strategies.

Sometimes, a company fails to realize what it actually requires. Hiring IT consultancy will help a company to understand the emerging situation.